AISI 304/304L Pipa kapiler baja tahan karat
AISI 304/304L Pipa kapiler baja tahan karat
Koil baja tahan karat AISI 304 minangka produk serba guna kanthi resistensi sing apik lan cocog kanggo macem-macem aplikasi sing mbutuhake formability lan weldability sing apik.
Simpenan Sheye Metal 304 gulungan ing 0,3mm kanggo 16mm kekandelan lan 2B Rampung, BA Rampung, No.4 Rampung tansah kasedhiya.
Saliyane telung jinis permukaan, 304 kumparan baja tahan karat bisa dikirim kanthi macem-macem permukaan.Stainless grade 304 ngemot logam Cr (biasane 18%) lan nikel (biasane 8%) minangka unsur non-wesi utama.
Jenis gulungan iki minangka baja tahan karat sing biasane austenitik, kalebu kulawarga baja stainless Cr-Ni standar.
Biasane digunakake kanggo barang kluwarga lan konsumen, peralatan pawon, cladding njero ruangan lan ruangan, pegangan tangan, lan bingkai jendela, peralatan industri panganan lan minuman, tangki panyimpenan.
| Spesifikasi kumparan baja tahan karat 304 | |
| Ukuran | Cold Rolled: Ketebalan: 0.3 ~ 8.0mm;Jembar: 1000 ~ 2000mm |
| Hot Rolled: Kekandelan: 3.0 ~ 16.0mm;Jembar: 1000 ~ 2500mm | |
| Teknik | Cold Rolled, Hot Rolled |
| lumahing | 2B, BA, 8K, 6K, Mirror Rampung, No.1, No.2, No.3, No.4, Garis Rambut karo PVC |
| Cold Rolled 304 Stainless Steel Coil ing Simpenan | 304 2B Stainless Steel Coil 304 BA Stainless Steel Coil 304 No.4 Stainless Steel Coil |
| Hot Rolled 304 Stainless Steel Coil ing Simpenan | 304 No.1 Stainless Steel Coil |
| Ukuran Umum 304 Stainless Steel Sheet | 1000mm x 2000mm, 1200mm x 2400mm, 1219mm x 2438mm, 1220mm x 2440mm, 1250mm x 2500mm, 1500mm x 3000mm, 1500mm x 61520mm, 1500mm x 60040mm 00 mm |
| Film protèktif kanggo 304 Coil (25μm ~ 200μm) | film PVC putih lan ireng;Film PE Biru, Film PE Transparan, Werna utawa materi liyane uga kasedhiya. |
| Standar | ASTM A240, JIS G4304, G4305, GB/T 4237, GB/T 8165, BS 1449, DIN17460, DIN 17441, EN10088-2 |
| Ketebalan Umum Cold Rolled 304 Coil | |||||||||
| 0,3 mm | 0,4 mm | 0,5 mm | 0,6 mm | 0,7 mm | 0,8 mm | 0,9 mm | 1,0 mm | 1,2 mm | 1,5 mm |
| 1,8 mm | 2,0 mm | 2,5 mm | 2,8 mm | 3,0 mm | 4,0 mm | 5,0 mm | 6,0 mm | ||
| Kekandelan Umum Hot Rolled 304 Coil | ||||||||
| 3,0 mm | 4,0 mm | 5,0 mm | 6,0 mm | 8,0 mm | 10,0 mm | 12,0 mm | 14,0 mm | 16,0 mm |
| Komposisi kimia | |
| unsur | AISI 304 / EN 1.4301 |
| Karbon | ≤0,08 |
| Mangan | ≤2.00 |
| belerang | ≤0,030 |
| Fosfor | ≤0,045 |
| silikon | ≤0,75 |
| Kromium | 18.0~20.0 |
| nikel | 8.0~10.5 |
| Nitrogen | ≤0.10 |
| Sifat Mekanik | |||
| Kekuwatan Ngasilake 0,2% offset (MPa) | Kekuwatan Tegangan (MPa) | % Elongation (2" utawa 50mm) | Kekerasan (HRB) |
| ≥205 | ≥515 | ≥40 | ≤92 |
